Directions
Clean entire surface adequately before application. Cyndan Power Kleen is recommended for cleaning & degreasing surfaces as its unique formulation leaves a residue free surface ready to coat.
For air assisted spray application, 2 liberal coats is recommended or using a double pass. By roller 2 coats wet on dry is recommended.
- On METAL: Apply 1 Coat of Cyndan Rust Buster as an undercoat. When dry, apply Heat Shield to the area.
- On MASONRY: Apply product directly onto the masonry surface.
- On TIMBER: Apply product directly to the timber surface (sanding preparation recommended).
For air assisted spray application, 2 liberal coats is recommended or using a double pass. By roller 2 coats wet on dry is recommended.
Coverage and Curing Time
- Coverage by spray: 3-5m2 per litre per coat.
- Coverage by roller application: 2-3m2 per litre per coat.
- Curing time: 24hours before allowing to get wet. 48 hours for full cure.
- DO NOT conduct coating work on a raining day.
- High humidity (RH>80%) can prolong the drying period as well.
| Material Safety Data Sheet |